Installation Manual
Subwoofer Collection
WSK200
WSK200
Wireless Subwoofer Kit
INPUT
DC 5V
PAIR
DC 5V
RIAP
RIAP
2
Subwoofer Collection
Table of Contents
Introduction - 1
Specifications - 2
What’s Included - 2
General Placement and Setup Tips - 2
Connecting the Wireless Transmitter to an AV processor - 3
Connecting the Wireless Transmitter to a 2-channel stereo pre-amp - 3
Connecting the Wireless Receiver to your Subwoofer - 4
Pairing the Transmitter and Receiver - 4
Technical Assistance - 4
Warranty - 5
Return Process - 5
1
Subwoofer Collection
Introduction
Thank you for purchasing WSK200, Wireless Subwoofer Kit. At Origin Acoustics,
we take pride in providing you with a high quality product. This instruction
booklet covers the necessary information for a smooth installation, including:
the tools you will need, step-by-step instructions for installation, troubleshooting
tips for any errors that may occur, and all warranty information. If for any reason
you experience problems or if you have installation questions please call us at
(844) 674-4461. Hours of operation are 8:00am to 5:00pm (Pacific Time), Monday
through Friday.
*All product information is subject to change. Please refer to www.originacoustics.com for the latest information.
2
Subwoofer Collection
Specifications
Receiver
Operating Voltage: DC 5V / 0.5A
RF Frequency Band: 5135 MHz - 5820 MHz
Modulation: GFSK
Working Distant: 40 Meters / light of sight
Transmitter Power: less than 10 dBm
Receiver Sensitivity: N/A
Frequency Response: 20-20K Hz
Delay Time: less than 16mS
THD+N(dB): -60 dB @1 KHz
SNR(dB): +85 dB @1 KHz
What You Will Need
Powered Subwoofer
AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out, or L/R line level pre-out
General Placement and Setup Tips
• Place the subwoofer, powered speakers or amplifier at its intended location.
• Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and
receiver for best results.
• Receiver should be within 65 feet of transmitter for best results.
• Avoid placing the transmitter next to devices that could create signal interference, such as 5.8 GHZ
wireless phones, baby monitors and Wi-Fi routers.
What’s Included
1 x Wireless Audio Adaptor Kit Transmitter
1 x Wireless Audio Adaptor Kit Receiver
2 x 3.5 mm to dual RCA Interconnect cable (1m)
2 x USB A to Micro B Power Cables (1.5m)
2 x 5 VDC Power Supplies with USB A Connectors
Transmitter
Operating Voltage: DC 5V / 0.5A
RF Frequency Band: 5135 MHz - 5820 MHz
Modulation: GFSK
Working Distant: 40 Meters / light of sight
Transmitter Power: less than 10 dBm
Receiver Sensitivity: -81 dBm
Frequency Response: 20-20K Hz
Delay Time: less than 16mS
THD+N(dB): -60 dB @1 KHz
SNR(dB): +85 dB @1 KHz
Dimensions:
*All product information is subject to change. Please refer to www.originacoustics.com for the latest information.
3
Subwoofer Collection
Connecting the Wireless Transmitter to an AV processor
1. Connect the 3.5 mm to dual RCA adapter cable to the subwoofer pre-out or LFE channel of the AV
processor and to the input on the wireless transmitter. Use only one RCA cable channel (e.g. Red).
The other RCA connector is unused in this case.
2. Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power supply.
3. Connect the 5 VDC power supply to a 120V AC outlet.
WIRELESS RECEIVER
WIRELESS RECEIVER
LFE
IN
OUT
DC 5V /500mA
VOLUME
MIN
MAX
PHASE
0˚ 180
CROSSOVER
50
150
LFE
R L
Connecting the Wireless Transmitter to a
2-channel stereo pre-amp
1. Connect the 3.5 mm to dual RCA adapter cable to the L/R line level pre-outs of the 2-channel stereo
pre-amp and to the input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the 5 VDC power supply.
3. Connect the 5 VDC power supply to a 120V AC outlet.
LFE
IN
OUT
DC 5V /500mA
VOLUME
MIN
MAX
PHASE
0˚ 180
CROSSOVER
50
150
LFE
R L
4
Subwoofer Collection
Connecting the Wireless Receiver to your Subwoofer
1. For AV processor applications, connect the 3.5 mm to dual RCA adapter cable to the LFE input
and the input on the wireless receiver. Use only one RCA cable channel (e.g. Red). The other RCA
connector is unused in this case.
2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both
the L and R subwoofer inputs and to the input on the wireless receiver.
3. Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC USB port located on the
rear subwoofer amp panel (or alternatively, connect the 5 VDC power supply to a 120V AC outlet).
Pairing the Transmitter and Receiver
1. The transmitter and receiver are synched at the time of manufacture and will pair automatically
when connected and powered on.
2. Successful pairing will be indicated by a steady blue light on the transmitter and receiver.
3. A flashing light indicates the units are not paired. To re-pair the units, perform the following
actions:
4. Press and hold the small button on one unit (it doesn’t matter which one you select) until the blue
light starts blinking.
5. Immediately walk over to the other unit and press/hold the small button until the blue light starts
blinking.
6. Both will blink a few times then turn solid blue when they are successfully paired.
If you have any questions or concerns about installing or using this product, you can reach us through
one of the following methods:
Phone: (844) 674-4461
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: techsupport@originacoustics.com
If you are having technical trouble, please include the model number and briefly
explain what steps
you took to resolve the problem in your email, or be prepared to answer these questions over the
phone. If you are considering returning the product, it’s required that you contact Origin Acoustics
prior to any return attempts. This way we can determine if the issue can be resolved without returning
the product, or if needed we can provide instructions and support for the return process.
Technical Assistance
5
Subwoofer Collection
2 Year Limited Warranty
*All warranties and warranty conditions are subject to change. Please refer to
www.originacoustics.com for the latest information.
Origin Acoustics warrants to the original retail purchaser only that this Origin Acoustics product will be
free from defects in materials and workmanship, provided the speaker was purchased from an Origin
Acoustics authorized dealer.
If the product is determined to be defective, it will be repaired or replaced at Origin Acoustics’
discretion. If the product must be replaced yet it is no longer manufactured, it will be replaced with a
model of equal to or greater value that is the most similar to the original. If this is the case, installing
the replacement model may require mounting modifications; Origin Acoustics will not be responsible
for any such related cos
ts.
•
Accidental damage
• Damage caused by abuse or misuse
• Damage caused by attempted repairs/modifications by anyone other than Origin Acoustics or
an authorized dealer
• Damage caused by improper installation
• Normal wear, maintenance, and environmental issues
• Damage caused by voltage inputs in excess of the rated maximum of the unit
• Damage inflicted during the return shipment
Not Covered by Warranty
This warranty may not be valid if the product was purchased through an unauthorized dealer. This
warranty only applies to the individual that made the original purchase, and it cannot be applied to
other purchases. The purchaser must be prepared to provide proof of purchase (receipt). This warranty
will not be valid if the identifying number or serial number has been removed, defaced, or altered.
Requirements & Warranty Coverage
Before making any return attempts, it is required that you first contact Origin Acoustics. Return product
to Origin Acoustics
or your dealer, either in person or by mail. It’s preferable if the product is returned
in the original packaging. If this isn’t possible, the customer is responsible for insuring the shipment
for the full value of the product.
This warranty is in lieu of all other expressed or implied warranties. Some states do not allow
limitations on implied warranties, so this may not apply depending on the customer’s location. (For
more information, see Magnuson-Moss Warranty Act.)
Return Process
6
6975 S Decatur Blvd, Las Vegas, NV 89118 • www.originacoustics.com • 844-674-4461
©2019 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of Origin Acoustics.
