PREPERATION NOTES
JUBU Syvecs TeamViewer remote maintenance
Please follow the instructions in this manual for a proper preparation of
the JUBU Syvecs TeamViewer remote maintenance.
Please find in this document:
1. NECESSARY HARDWARE
2. NECESSARY SOFTWARE
3. PREPARATIONS
1. NECESSARY HARDWARE
#
ITEM
ART-NO.
UNITS
1
Notebook (Windows) with stable internet connection
-
1
2
Notebook charger
-
1
3
LAN-cable (Ethernet-cable)
-
1
4
12V Car battery charger (for longer sessions or low
battery voltage)
-
1
Fig 1: Syvecs ECU
FILE: Syvecs_TeamViewer_remote_maintenance_Emira PAGE: 1 of 4
REL_DATE: 24.04.2024
VERSION: 0.1
2. NECESSARY SOFTWARE
1. Download and install TeamViewer on your notebook (1). The free version works fine.
https://www.teamviewer.com/de/download/free-download-with-license-options/
2. Download and install Syvecs configuration and mapping software.
https://www.syvecs.co.uk/forum/viewtopic.php?f=8&t=122&sid=ea2174f4b529c46b77
79b5a0862148f7
ATTENTION! Please download the latest version which is found on the bottom
of the page.
3. PREPARATIONS
1. Remove the engine bay covers on the left side (gearbox side) to get access to the
Syvecs ECU.
2. Connect the notebook (1) to the SYVECS-ECU using the LAN-cable (3) and the
LAN-socket. The LAN-socket is found on a cable that is plugged into the ECU. Fig 2
and Fig 3 will help you find the location.
NOTE: Please connect your notebook to the notebook charger (2).
FILE: Syvecs_TeamViewer_remote_maintenance_Emira PAGE: 2 of 4
REL_DATE: 24.04.2024
VERSION: 0.1
Fig 2: The LAN-socket (connected to the ECU via cable) is located in the yellow
marked region.
Fig 3: Connect your LAN-cable (3) to the LAN-socket.
FILE: Syvecs_TeamViewer_remote_maintenance_Emira PAGE: 3 of 4
REL_DATE: 24.04.2024
VERSION: 0.1
3. If your car battery voltage is bad or a longer maintenance session is expected,
please connect your car to a 12V battery charger (4).
4. Turn the ignition on by pressing the START button for 10-15 seconds. Then “ignition
on” will appear on your display.
5. Open TeamViewer.
6. Connect to the JUBU Software Engineer (René) via TeamViewer.
NOTE: You will get the TeamViewer ID and password via email at
The preparations are finished. Now please follow the instructions in the TeamViewer
chat!
**************************************************************************
If you have any questions or need additional information, please contact us by email:
JUBU Performance GmbH
Saxenegg 3a, 4323 Münzbach, AUSTRIA
FILE: Syvecs_TeamViewer_remote_maintenance_Emira PAGE: 4 of 4
REL_DATE: 24.04.2024
VERSION: 0.1
