GRADUATION CELEBRATION
Facebook Live | #TCUgrad2020
PRINTABLE GRAD
PARTY PACK
Water Bottle labeL
CUPCAKE TOPPERS
SPECIALTY DRINK RECIPES
Class of 2020 BANNER
Picture frame mat
MORTAR BOARD DECOR TEMPLATES
SHARABLE INVITE
PHOTO BOOTH PROPS
Water Bottle labeL
Cupcake toppers
Directions
PRINT and THEN CUT OUT THE CIRCLES
ON THE FOLLOWING PAGES.
Adhere TOOTHPICKS TO BACK WITH tAPE.
Place in cupcake. TADA.
Frog-a-rita
Ingredients
• 1-1.5 oz premium Tequila
• .5 cup sweet and sour mix
• 1-1.5 OZ raspberry flavored liqueur
(such as Chambord)
• 1 lime wedge
• Ice
• Coarse Salt
Directions
Salt the rim of a large margarita glass.
To do so, pour salt onto a small plate, moisten
the rim of the glass on a damp towel and press
into the salt. In a cocktail mixer full of
ice, combine tequila, Sweet and sour mix,
raspberry liqueur and shake vigorously.
strain into salted rimmed glass. Garnish
with lime wedge.
THE 1873
Ingredients
• 1 oz Chambord
• 1 oz premium Tequila
• 1 oz Triple Sec
• 1 oz fresh-squeezed lime juice
• Crushed ice
Directions
Combine all of the ingredients in
a cocktail shaker. Shake well and
strain into a chilled glass.
Yield: 1 serving
SPECIALTY DRINK RECIPES
Lavender Lemon
FROG SPritz
IINGREDIENTS
6 cups water divided
1/2 cup sugar
1/4 cup honey
3 Tbsp dried lavender
2 cups lemon juice
Lemon slices and
lavender petals for garnish
Purple food coloring (optional)
Directions
1. Over medium heat, combine two cups of water and sugar,
bringing to a boil until sugar is dissolved. Turn off of the
heat and stir in honey and lavender.
2. Allow mixture to steep for 2 hours (less if you want less of
a lavender taste). Strain the liquid, pressing the lavender
down to make sure you get all of those juices into your
mixture!
3. In a large pitcher, combine freshly squeezed lemon juice,
lavender mixture and water.
4. Feel free to add a couple drops of purple food to give it a
TCU flair.
5. Serve over ice.
SPECIALTY DRINK RECIPES
C
L
A
S
S
OF
2
0
2
0
CLASS Of 2020 banner
C
L
A
S
S
OF
2
0
2
0
8 x 10 frame
5 x 7 area for photo
either cut this center piece out
or tape your 5 x 7 photo here
8 x 10 frame
5 x 7 area for photo
either cut this center piece out
or tape your 5 x 7 photo here
MORTAR BOARD DECOR TEMPLATES
MORTAR BOARD DECOR TEMPLATE 1.1
Graduation Cap Template
for 8.5”x11” Paper
Print both of the template sides at
100% scale.
Cut along the dotted lines.
Connect both pieces of the template
and make sure to leave a slit open
between an edge and the button hole
in order to slide on to your cap.
Attach to your cap with double-sided
tape or glue.
You can use decorative ribbon, tape,
etc. to cover the space between the
raw edge and sides.
MORTAR BOARD DECOR TEMPLATES 1.2
MORTAR BOARD DECOR TEMPLATE 2.1
Graduation Cap Template
for 8.5”x11” Paper
Print both of the template sides at
100% scale.
Cut along the dotted lines.
Connect both pieces of the template
and make sure to leave a slit open
between an edge and the button hole
in order to slide on to your cap.
Attach to your cap with double-sided
tape or glue.
You can use decorative ribbon, tape,
etc. to cover the space between the
raw edge and sides.
MORTAR BOARD DECOR TEMPLATE 2.2
MORTAR BOARD DECOR TEMPLATE 3.1
Graduation Cap Template
for 8.5”x11” Paper
Print both of the template sides at
100% scale.
Cut along the dotted lines.
Connect both pieces of the template
and make sure to leave a slit open
between an edge and the button hole
in order to slide on to your cap.
Attach to your cap with double-sided
tape or glue.
You can use decorative ribbon, tape,
etc. to cover the space between the
raw edge and sides.
MORTAR BOARD DECOR TEMPLATE 3.2
PHOTO BOOTH PROPS
