Page 1 of 2
US/CN
Sphere + Stem Table Lamp
Assembly Instructions
Important Safety Instructions:
• This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
• These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
• This fixture has been rated for up to one (1) 60-watt maximum TYPE G standard incandescent light bulb (not
included) or one (1) E12 7- watt maximum Self- Ballasted LED bulb (5-watt LED light bulb included). To avoid the
risk of fire, do not exceed the recommended lamp wattage.
• This lamp is meant for indoor use.
• Save these instructions.
WARNING:
• To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
• Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
• Keep flammable materials away from lit bulb.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Parts Included:
(A) Socket (1)
(B) Shade Outer Thread-Ring (1)
(C) E12 5W LED bulb (1)
(D) Stem (1)
(E) Marble base (1)
(F) Power cord (1)
(G) Glass shade (1)
(H) Shade Inner Thread-Ring (1)
Page 2 of 2
US/CN
To Assemble:
Care instructions:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish.
Thank you for your purchase
Stores | catalog | www.westelm.com
USA 888-922-4119
Mid Century Tripod Floor Shade V2 Natural Linen
Mid Century Tripod Table Lamp V2 : Antique Brass
2. Attached Shade Inner Thread-Ring (H) onto the Shade Outer
Thread-Ring (B), then turning Glass Shade (G) in a clockwise
direction until tight. Please don’t over tight.
.
1. Insert the specified light bulb into the Socket (A). DO NOT
EXCEED THE SPECIFIED WATTAGE.
