CONSUMER PRICE LIST - POWER FEED KITS

SERVO Power Feed Mounting Kits Consumer Price List - Page 1 -  2003 Servo Products Company

PRICE LIST - POWER FEED MOUNTING KITS

Rev. 02/01/03

NOTES: Servo Power Feed Mounting Hardware Kits fit both the SERVO Type 140 and Type 150 Power Feeds.

Table and Cross feeds use ECF T-140 and ECF T-150. Knee feeds require ECF T-140KNEE.

Models M-0800, M-0801, and M-9815 do not use standard ECF units and should be ordered as complete models.

See our website for most installation instructions and drawings (require Adobe Acrobat Reader).

NOTE:

Servo Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model.

However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens.

BASE FEEDS

DESCRIPTION MODEL # PRICE

TABLE & CROSS FEED ............................................... ECF T-140 ............. $547

KNEE FEED .................................................................. ECF T-140KNEE ... $547

TABLE & CROSS FEED ............................................... ECF T-150 ............. $631

TABLE FEED MOUNTING KITS

GENERAL PURPOSE .................................................. K-2500 ..................... $48

ACER 3VS 3VK ............................................................ K-9108 ................... $128

ACRA MILL, 9 x 45, 10 x 54 ......................................... K-5000 ..................... $86

ALLIANT ....................................................................... K-3700 ..................... $87

ALLIANT RT2-50 .......................................................... K-9118 ................... $123

ATRUMP ....................................................................... K-3700 ..................... $87

BIRMINGHAM 942, 1050 .............................................. K-9109 ................... $138

BRIDGEPORT SERIES I (hand feed mill) .................... K-0200 ..................... $81

BRIDGEPORT (to replace electronic feed*) ................. K-0206 ................... $303

*Model 6-F or Model 8-F The motor hangs down and back at a 45° angle.

The shaft stops at the edge of the table.

BRIDGEPORT (to replace gear box feed**) ................. K-0225 ................... $233

**The gear box motor hangs straight down. Levers select fixed speeds.

The shaft extends about 10” beyond the table.

BRIDGEPORT SERIES II ............................................. K-9114 ................... $273

BRIDGEPORT SERIES II SPECIAL ............................. K-9114 ................... $273

BRUTE, 9 x 42, 9 x 49 .................................................. K-0200 ..................... $81

BRUTE, 10 x 50 ............................................................ K-2700 ..................... $90

CHEVALIER, LARGE & SMALL ................................... K-9117 ..................... $92

CLAUSING ATLAS/KALAMAZOO ............................... K-9130 ................... $105

CLAUSING KONDIA ..................................................... K-4900 ................... $133

CLAUSING KONDIA FV-300 ........................................ K-3900 (150 only) .. $289

COMET METRIC (.630 dia lead screw) ........................ K-2300 ..................... $97

COMET INCH (.625 dia lead screw) ............................. K-2700 ..................... $90

COMET 10 x 50, 3KV ................................................... K-3800 ..................... $97

CONCORD .................................................................... K-5000 ..................... $86

DO ALL ......................................................................... K-2300 ..................... $97

EDELSTALL F10V, 401 ................................................ K-2100 ................... $120

EDISON ........................................................................ K-6600 ................... $261

ENCO, 100-1527, 9 x 42 ............................................... K-9100 ..................... $93

ENCO, 100-1588, 10 x 54 ............................................. K-9100 ..................... $93

ENCO, 231 .................................................................... K-9100 ..................... $93

ENCO, 249 .................................................................... K-9100 ..................... $93

ENTERPRISE ............................................................... K-2100 ................... $120

EXACTO ....................................................................... K-2300 ..................... $97

EX-CELL-O 602 (no coolant trough) ............................. K-0800*

*Mounting kit not available. Order Model M-0800-140 or M-0800-150.

.................................................................................... M-0800-140 ........... $803

.................................................................................... M-0800-150 ........... $887

EX-CELL-O 602 (with coolant trough) ........................... K-0801*

*Mounting kit not available. Order Model M-0801-140 or M-0801-150.

.................................................................................... M-0801-140 ........... $879

.................................................................................... M-0801-150 ........... $963

FIRST YAMAZEN ......................................................... K-2700 ..................... $90

HARTFORD .................................................................. K-2700 ..................... $90

HOLKE MACHINIST ..................................................... K-2100 ................... $120

HOLKE S/N 5172 UP .................................................... K-4500 ................... $172

HURCO SM1 ................................................................. K-1300 ................... $140

HURCO SM2 ................................................................. K-3900 (150 only) .. $289

INDEX 45, 645, 745 ...................................................... K-0901 ................... $420

- TABLE FEED KITS -

DESCRIPTION MODEL # PRICE

JET 1048 VS ................................................................. K-0200 ..................... $81

JET Y ............................................................................ K-3000................... $193

JOHNFORD MV54 ....................................................... K-5600 ................... $194

KENT 2S ....................................................................... K-9109................... $138

KENT 3VK, 4, 5VK ........................................................ K-9108 ................... $128

KINGSTON KTM 3V ..................................................... K-9108 ................... $128

KONDIA G & FV1 ......................................................... K-1300................... $140

KONDIA 2 ..................................................................... K-3900 (150 only).. $289

LAGUN .......................................................................... K-1500***

LAGUN .......................................................................... K-1501***

***Consult Republic-Lagun, Carson, CA - (Phone: 310.518.1100)

MARENA 942 ................................................................ K-2700 ..................... $90

MARENA 10 .................................................................. K-2100 ................... $120

MAXMILL ...................................................................... K-2300..................... $97

MICROCUT ................................................................... K-4200 ................... $130

MILLPORT 2S, 3V, 3VH ............................................... K-2700..................... $90

MILLPORT K MILL ....................................................... K-2700 ..................... $90

NEWPORT ................................................................... K-2700 ..................... $90

SELECT 1VB (.630 dia lead screw) .............................. K-2300..................... $97

SELECT 1VB (.625 dia lead screw) .............................. K-0200..................... $81

SELECT 1VBVS ........................................................... K-0200..................... $81

SERVO SV50, SV54 ..................................................... K-9122................... $169

SHARP FIRST, LMV, LCS ............................................ K-3700..................... $87

SHARP HMV, OMV, QMV1, QMV2 .............................. K-4300 ................... $151

SHARP 1-1/2 YC .......................................................... K-2300 ..................... $97

SHARP VIA ................................................................... K-2700 ..................... $90

SIBER HEGNER - RB1 ................................................. K-3700 ..................... $87

SOUTH BEND IMPORT ............................................... K-0200..................... $81

SOUTH BEND/SE+5-DIGIT SERIAL # ......................... K-9118................... $123

SUPERMAX 1-1/2 & 16KV ........................................... K-4400..................... $93

TOPWELL ..................................................................... K-5300 ................... $203

VICTOR VSK or VK ...................................................... K-9012................... $181

VICTOR, 16 VSK or VK ................................................ K-6500................... $193

WEBB, WEBB CHAMP ................................................. K-2700..................... $90

WELLS INDEX 747, 847, 860, 889 ............................... K-1840 (150 only).. $236

WELLS INDEX 837 ....................................................... K-4200 ................... $130

CROSS FEED MOUNTING KITS

ACER 3VS 3VK ............................................................ K-9508................... $253

ACRA MILL 9 x 42 ........................................................ K-5051................... $308

ACRA MILL 10 x 50, 10 x 54 ........................................ K-5050 ................... $236

ALLIANT ....................................................................... K-3750 ................... $173

ALLIANT RT2-50 .......................................................... K-9518 ................... $284

ATRUMP ....................................................................... K-9519................... $289

BIRMINGHAM 942, 1050 .............................................. K-9508 ................... $253

BRIDGEPORT 12" CROSS TRAVEL .......................... K-0250................... $149

BRIDGEPORT 9" CROSS TRAVEL ............................ K-0251................... $149

BRIDGEPORT SERIES II ............................................. K-9514 ................... $428

BRIDGEPORT SERIES II SPECIAL ............................. K-9514................... $428

SERVO Power Feed Mounting Kits Consumer Price List - Page 2 - Rev. 02/01/03

- CROSS FEED KITS -

DESCRIPTION MODEL # PRICE

BRUTE 9 x 42, 9 x 49 ................................................... K-0250 ................... $149

BRUTE 10 x 50 ............................................................. K-4650 ................... $164

CHEVALIER, LARGE & SMALL ................................... K-9517 ................... $248

CLAUSING ATLAS/KALAMAZOO ................................ K-9530 ................... $298

CLAUSING KONDIA ..................................................... K-4950 ................... $163

CLAUSING KONDIA, FV-300 ....................................... K-3950 (150 only) .. $314

COMET 9 x 42 .............................................................. K-0250 ................... $149

DO ALL ......................................................................... K-2350 ................... $128

ENTERPRISE ............................................................... K-2150 ................... $234

EXACTO ....................................................................... K-2350 ................... $128

EX-CELL-O 602 ............................................................ K-0850 ................... $332

HARTFORD .................................................................. K-2750 ................... $261

HOLKE .......................................................................... K-2150 ................... $234

HURCO SM1 ................................................................. K-1350 ................... $167

HURCO SM2 ................................................................. K-3950 (150 only) .. $314

JOHNFORD MV54 ........................................................ K-5650 ................... $335

KENT 2S ....................................................................... K-9509 ................... $235

KENT 3VK, 4, 5VK ........................................................ K-9508 ................... $253

KINGSTON KTM 3V ..................................................... K-9508 ................... $253

KONDIA G & FV1 ......................................................... K-1350 ................... $167

KONDIA 2 ..................................................................... K-3950 (150 only) .. $314

LAGUN .......................................................................... K-1550***

***Consult Republic/Lagun, Carson, CA (Phone: 310.518.1100)

MARENA 10 .................................................................. K-2150 ................... $234

MAXMILL ...................................................................... K-2350 ................... $128

MICROCUT ................................................................... K-4250 ................... $220

MILLPORT 2S, 3V, 3VH ............................................... K-0250 ................... $149

MILLPORT 10 x 50 ....................................................... K-4750 ................... $250

NEWPORT .................................................................... K-2750 ................... $261

SERVO SV50, SV54 ..................................................... K-9522 ................... $190

SHARP FIRST LCS, LMV ............................................. K-3750 ................... $173

SHARP HMV, OMV, QMV1, QMV2 .............................. K-4350 ................... $213

SIBER HEGNER ........................................................... K-4850 ................... $339

SOUTH BEND 2 HP ..................................................... K-0250 ................... $149

SOUTH BEND 3 HP ..................................................... K-1350 ................... $167

SOUTH BEND/SE+5-DIGIT SERIAL # ......................... K-9518 ................... $831

SUPERMAX 1-1/2 HP or 16KV ..................................... K-2350 ................... $128

VICTOR, 16 VSK or VK ................................................ K-6550 ................... $283

WEBB CHAMP ............................................................. K-4650 ................... $164

WELLS INDEX 837 ....................................................... K-4250 ................... $220

WILLIS MICRO CUT ..................................................... K-9501 ................... $199

POWER FEED ACCESSORIES

SAFETY HANDLE KIT ......................................... KP-0620 SH KIT ..............$140

Handwheel, clutch and spring. Designed for Bridgeport mills.

SHAFT EXTENSION KIT ..................................... KP-0640 SX KIT ..............$311

Restores normal table travel on Bridgeport mills.

LIMIT SWITCH MOUNTING KIT ......................... KP-0660 MS KIT............... $74

Mounts limit switch to rear of table when front tee slot is covered,

for example, by a linear scale.

TRANSFORMER ................................................. 01250.............................. $137

Use with power feeds to transform 220 volts to the required 115 volts.

KNEE FEED MOUNTING KITS

NOTES

: The Bridgeport Series II, Lagun FTV3 and Deluxe, Alliant

RT4V and other large mills are too heavy to lift with the Type 140.

The Type 150 can not be used as a knee feed since it will stall

under load.

Knee feeds require ECF T-140KNEE.

DESCRIPTION MODEL # PRICE

ACER 3VS 3VK ............................................................ K-9810................... $273

ACER after 1992............................................................ K-9811................... $282

ACRA MILL 10 x 54 ...................................................... K-5080................... $258

ALLIANT ....................................................................... K-3780 ................... $153

ALLIANT RT2-50 .......................................................... K-9818 ................... $400

ATRUMP ....................................................................... K-9819................... $326

BIRMINGHAM 942, 1050 .............................................. K-2380 ................... $251

BRIDGEPORT SERIES I .............................................. K-0280 ................... $151

BRUTE 9 x 42, 9 x 49 ................................................... K-0280................... $151

CHEVALIER, LARGE & SMALL ................................... K-5081 ................... $221

CLAUSING KONDIA ..................................................... K-1380 ................... $214

COMET 3VHG, 2SHG, 9 x 42 ...................................... K-9813 ................... $260

COMET 3KVHD-P, 3KVHD, 10 x 50 ............................ K-9813 ................... $260

COMET 4KVHD, 10 x 54 .............................................. K-9813................... $260

COMET 5KVHD, 10 x 58 .............................................. K-9813................... $260

DO ALL ......................................................................... K-2380................... $251

EXACTO ....................................................................... K-2380................... $251

EX-CELL-O 602 ............................................................ K-0880................... $365

HURCO SM1 ................................................................ K-1380 ................... $214

INDEX 747, 847, 860, 887 ............................................ K-0980................... $313

JOHNFORD MV54 ....................................................... K-5680 ................... $285

KENT 3VK, 4, 5VK ........................................................ K-9808 ................... $325

KENT 5KV & 2S ............................................................ K-5580 ................... $276

KINGSTON KTM 3V ..................................................... K-9808 ................... $325

KONDIA G & FV1 ......................................................... K-1380................... $214

LAGUN .......................................................................... K-1580***

***Consult Republic-Lagun, Carson, CA 310.518.1100 for prices/shipping

MAXMILL ...................................................................... K-2380................... $251

MICROCUT ................................................................... K-4280 ................... $168

MILLPORT 25, 3V, 3VH & K ......................................... K-0280 ................... $151

SERVO SV50 ............................................................... K-9822 ................... $200

SHARP FIRST, LMV, LCS ............................................ K-3780................... $153

SHARP HMV, OMV, QMV1, QMV2 .............................. K-4380 ................... $334

SOUTH BEND/SE+5-DIGIT SERIAL # ......................... K-9818................... $400

SOUTHWESTERN TRAK TRM .................................... K-9815*

*Mounting kit not available. Order Model M-9815-140.

................................................................................... M-9815-140 .......... $925

SUPERMAX .................................................................. K-2380 ................... $251

SUPERMAX 16VA ........................................................ K-9804................... $273

VICTOR, 16 VSK or VK ................................................ K-5080................... $258

VICTOR, 380 VSK or VK .............................................. K-5980................... $257

WEBB CHAMP 1-1/2 (before Jan'91) ........................... K-0280 ................... $151

WEBB CHAMP 1-1/2 (after Jan'91) .............................. K-9808 ................... $325

WELLS INDEX 837 ....................................................... K-4280 ................... $168

SERVO Power Feeds are manufactured in the USA by

SERVO PRODUCTS COMPANY

34940 Lakeland Blvd., Eastlake, OH 44095 USA

Phone: 800.521.7359 or 440.942.9999 Fax: 440.942.9100

Website: ServoProductsCo.com Email: [email protected]

PRICES, SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

TERMS AND CONDITIONS

1. GENERAL

These Terms and Conditions of Sale and any attachments

govern the sales of products purchased hereunder and prevail

over any conflicting or inconsistent terms and conditions

appearing on any purchase order submitted by Buyer. Servo's

acknowledgement and acceptance of Buyer's purchase order is

expressly made conditional on Buyer's assent to these Terms

and Conditions. No change or modification of these Terms and

Conditions shall be valid or binding on either party unless in

writing and signed by an authorized representative of each party,

as a part of or modification to the quotation. Servo reserves the

right to modify or change designs and specifications at its discre-

tion. Servo is not obligated to upgrade existing equipment to

meet new designs and/or specifications, nor is it liable for either

unauthorized engineering changes or parts used to maintain or

upgrade equipment.

2. DELIVERY

Servo will make every reasonable effort to meet any delivery

dates quoted; however, Servo will not be liable for any special,

incidental or consequential damages resulting from delivery

delays or inability to deliver.

3. PAYMENT (Credit Terms)

Payment terms for Servo dealers are net thirty days from invoice

date upon approval of the Buyer's credit. Terms for non-dealers

purchasing parts are C.O.D. For non-dealer shipments outside

the United States, Servo will provide proforma invoices (if

requested) and all purchase orders must be in accordance with

Servo's quotation. Invoices unpaid for longer than thirty days

after submission shall be subject to a monthly debt service

charge. In accordance with Federal Truth in lending laws, this

charge shall be 1% per month on the unpaid balance, the

equivalent of 12% per annum simple interest.

4. RETURN FOR CREDIT POLICY

All returns will be subject to a 15% restocking charge. All

returned items must have a Return Authorization Number (RA#)

provided by Servo Products with the RA# plainly marked on the

outer packaging. Package must include a copy of your original

sales paperwork. The use of original packaging is highly

recommended to avoid damage in transit. All returns must be

received within 90 days of purchase. All returns will be inspected

upon delivery. Only items in merchandisable condition will be

accepted for credit. Servo Products reserves the right to deny

credit for used or damaged items. The following items will not be

accepted for credit: printed goods, uninstalled electrical and

electronic components (switches, IC’s, resistors, etc.), software

(after installation code has been issued). Only the original

purchaser from Servo Products may return for credit. All other

returns must be made through the selling party.

5. TAXES

Prices stated are exclusive of all federal, state and local sales,

use excise, value added, privileges and similar taxes and tariffs,

duties, fees, or licenses. Such taxes imposed on Servo or which

Servo has a duty to collect in connection with the sale or delivery

of the products described on any attachment shall be paid by

buyer and will appear as separate items on the invoice.

6. SHIPMENT, RISK OF LOSS

Deliveries are F.O.B. Servo shipping dock and the prices quoted

do not include freight or insurance. Title and risk of loss shall

pass to Buyer upon tender of the products by Servo to a

common carrier. In the absence of specific written instruction

from Buyer, Servo will select the common carrier, but Servo shall

not thereby assume any liability in connection with the shipment.

Buyer shall be responsible for any freight charge and any

insurance charge. If the products are shipped freight prepaid,

Buyer shall pay Servo the appropriate freight and insurance

charges that will be shown as separate items on the invoice.

7. SOFTWARE LICENSE

Except as to software governed by a separate agreement, all

software furnished hereunder is licensed by Servo to Buyer on a

non-transferable and non-exclusive basis for use by Buyer. The

usage of the software is restricted to equipment for which or with

which the software was acquired. Buyer may not copy the

software, in whole or in part, for any use. Notwithstanding

paragraph 5 hereof, title to the software shall remain with Servo.

Acquisition of Servo software requires the execution of a

separate license agreement. If Servo and Buyer execute a

separate license agreement, the terms and conditions of that

separate agreement will control as to the software in the event of

conflict with these terms and conditions.

8. WARRANTY

One Year-Limited Warranty. The Seller warrants that the

products to be delivered under this purchase order will be free

from defects in material and workmanship under normal use and

service. Servo Products Company warrants that the software will

perform substantially in accordance with the accompanying

written materials for this product. Servo's sole obligation under

this warranty will be to provide the support services intended to

make the software conform to its description and to correct

operational defects. Seller's obligations under this Warranty are

limited to replacing or repairing or giving credit for, at its option,

at its factory, and of said products which shall, within one (1)

year after delivery to the customer, be returned to the Seller's

factory of origin, transportation charges prepaid and which are,

after examination determined to be defective. THIS WARRANTY

IS EXPRESSED IN LIEU OF ALL OTHER WARRANTIES,

EXPRESSED, STATUTORY, OR IMPLIED INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, AND OF ALL

OTHER OBLIGATIONS OR LIABILITIES ON THE SELLER'S

PART, AND IT NEITHER ASSUMES NOR AUTHORIZES ANY

OTHER PERSON TO ASSUME FOR THE SELLER ANY OTHER

LIABILITIES IN CONNECTION WITH THE SALE OF SAID

ARTICLES. This Warranty shall not apply to any of such

products that have been repaired or altered, except by the Seller

or its authorized service centers or that have been subjected to

misuse, negligence, or accident. The aforementioned provisions

do not extend the original warranty period of any product that has

either been repaired or replaced by Seller.

9. LIMITATIONS

THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE

AND EXCLUSIVE REMEDIES. IN NO EFFECT SHALL SERVO

BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OR

PROFITS) WHETHER BASED ON CONTRACT, TORT, OR ANY

OTHER LEGAL THEORY.

10. GOVERNING LAW

The laws of the State of California shall govern any dispute

regarding the interpretation or validity hereof. The parties hereby

agree that any dispute relating to the products sold hereunder

shall be subject to the jurisdiction of the courts within the State of

California.

Form 0800-80291 020103